Green ground wire nuts · UL 467 · 14–10 AWG
Ground splice and pigtail in one twist.
Dicio P99 green ground connectors have a pass-through hole, so one ground runs straight out to the device or the box screw. No separate jumper. Sold by the 5,000-piece box for crews and supply counters.
UL 467 Listed for grounding14–10 AWG copper★★★★★4.7★ from 270+ Amazon ratings
Why crews switch to P99
Faster grounds in every device box.
Pass-through hole
One ground exits the tip and becomes the pigtail. No jumper, and one less conductor in the splice.
UL 467 listed
Listed for grounding and bonding, with the listing printed on the package for inspectors.
Green means ground
The next electrician who opens the box spots the ground splice at a glance.
Swept-back wings
Drive it tight by hand, tool-free, through a full day of rough-in.
How the hole works
Splice and pigtail in three steps.
- Feed the long ground through the holeUsually the incoming ground. Leave it uncut so it reaches the device or the box screw.
- Seat the other grounds and twistClockwise by the wings until the conductors start twisting below the skirt.
- Tug-test and land the pigtailOn the device ground screw, or the box's green screw in a metal box (NEC 250.148).
Pack sizes
Buy for one job, or for the whole crew.
Same P99 connector in every pack. The contractor box brings the price down to about 10¢ a piece.
Built for the trade
Who buys P99 by the box.
Electrical contractors
New construction and remodel crews. Put one ground connector on every truck and stop sorting at the box.
Service & maintenance
Receptacle swaps, fixture changeouts and unit turns, where every device needs a clean ground pigtail.
Distributors & supply counters
Stock P99 by the case for your electricians. Ask us about stocking and private-label programs.
Stock the whole box
Standardize your device-box connectors on Dicio.
Crews that start with P99 usually add the twist-on and lever boxes they reach for every day.
Grounding · P99
Green Ground Wire Connectors
UL 467 · 14–10 AWG · 5,000 pcs/box
$479.99 / box
See specs →
Trade & bulk
Ordering for a crew or a counter?
Multi-box pricing · Standing orders · Trade account · Net terms · Stocking & private label · Spec sheets
On the package
What your inspector will check.
UL 467Listed for grounding and bonding
14–10 AWGCopper equipment grounding conductors
Combination chartExact min / max wire combinations printed on the pack
4.7★ on AmazonFrom 270+ ratings on Dicio's P99 listing
Grounds onlyGreen, open tip: never on a hot or neutral
FAQ
Specs & answers
Yes. P99 is UL 467 listed for grounding and bonding, and the listing is printed on the package.
P99 is for 14–10 AWG copper. The exact minimum and maximum combinations are on the package chart. Count the pass-through wire as part of the splice.
No. Green connectors with an open tip are for equipment grounding conductors only.
Yes. NEC 250.148(C) requires a connection to a metal box through a grounding screw used for no other purpose, or a listed grounding device. Run the pass-through to the box's green screw and a second pigtail to the device. See the full guide →
The contractor box lists at $479.99, about 9.6¢ a piece. Ask for a quote on multiple boxes, standing orders or net terms.
Yes. Request one in the form above and pick P99. Samples ship within 1–2 business days, with no obligation.
Free sample · for the trade
Try P99 on your next rough-in
We'll send a free 20-piece pack of P99 to electricians and supply buyers, shipped within 1–2 business days. Pick P99 in the sample menu below, then twist a few on real grounds before you order the box.
- Check the fit on your 12 and 14 AWG grounds
- Feel the wings after a full day
- No cost, no commitment
Already know what you need? See all case-pack prices →